Titan ZR-9 Osram P8 Anti-Glare LED Driving Light
Anti-Glare Driving Light, 8x 20W Osram P8 LED Chips Per Light, 13,120 Lumens Per Pair, White/Amber Chasing DRL, IP68/IP69K, 2-Pin DT Connector, Single Unit, Wiring Kit Not Included
The SpectrumTek Titan ZR-9 is an anti-glare edgless design LED driving light pair built to solve the biggest complaint with traditional auxiliary lights: glare. A redesigned lamp cup with a larger, deeper reflector puts the light on the road and trail ahead. That gives you reach without scattering light back into your own eyes or into the eyes of oncoming drivers.
Each light uses eight 20W Osram P8 LED chips behind a clear, impact-resistant polycarbonate lens. A pair delivers 13,120 actual lumens on a stable 82W draw, with a 660-metre reach to 1 lux. A 3D-structured signal light with white and amber chasing effects adds daytime visibility and makes the lights easy to spot when parking. IP68/IP69K sealing keeps out mud, dust and high-pressure water, and every pair is covered by a 24-month warranty.
The Titan ZR-9 is supplied as a single unit. The wiring kit is not included.
Osram P8 LED chips: eight 20W chips per light for stable output, colour consistency and long service life
Edgeless design: a clean, seamless front with no bulky bezel, for a modern look on any vehicle
Anti-glare lamp cup: a redesigned, larger and deeper reflector reduces glare while extending reach
13,120 actual lumens per pair: measured output published alongside the 19,800lm theoretical figure
660m reach to 1 lux: long-range driving beam for forest tracks, rural lanes and open roads
5700–6000K white light: clear, natural daylight colour that is easier on the eye over long drives
White and amber chasing DRL: a 10W white daytime running light and a 10W amber position light with a dynamic flowing effect
3D signal light structure: improves visibility to other road users while driving and parking
Clear, impact-resistant polycarbonate lens: tough against stone chips, trail debris and knocks
ADC12 die-cast aluminium housing: strong, lightweight and good at drawing heat away from the LEDs
IP68 / IP69K sealing: protected against dust, immersion and high-pressure washdown
9–32V DC input: works on 12V and 24V systems
Built-in electrical protection: over-voltage, polarity reversal and short circuit protection
Vibration resistant: built for corrugated tracks, farm work and heavy use
2-pin DT connector: secure, weatherproof and widely used
CE conformity and EMC certified
Wiring kit not included: choose a harness to suit your install (see the protection chart)
Specification
Details
Manufacturer
SpectrumTek (UK)
Model
Titan ZR-9
Dimensions (per light)
Width 224.5mm / 8.84in, Height 140.5mm / 5.53in, Depth 89.6mm / 3.42in
LED technology
8x 20W Osram P8 chips per light
Beam pattern
Anti-glare driving beam
LED power
90W
Actual power
82W
Theoretical lumens
19,800lm (pair)
Actual lumens
13,120lm (pair)
Reach (1 lux)
660m
Colour temperature
5700–6000K
White DRL
10W, chasing effect
Amber position light
10W, chasing effect
Operating voltage
9–32V DC (12V and 24V compatible)
Housing
ADC12 die-cast aluminium
Mounting bracket
Stainless steel
Lens
Clear, impact-resistant polycarbonate (PC)
Waterproof rating
IP68 / IP69K
Operating temperature
-40°C to +85°C
Connector
2-pin DT connector
Wiring kit
Not included
Supplied as
Single unit
Certification
CE conformity, EMC certified
Warranty
24 months
Protection feature
Specification
Over-voltage protection
Built-in circuit protects the LED driver from voltage surges and spikes across the 9–32V DC range
Polarity reversal protection
Protects the light if power is connected the wrong way round during installation
Short circuit protection
Automatically limits or cuts the current if a short circuit occurs, protecting the light's driver, your wiring and your vehicle's electrics from damage
Vibration resistance
Rated vibration resistant; ADC12 die-cast aluminium housing with stainless steel bracket for off-road, agricultural and commercial use
Thermal management
ADC12 die-cast aluminium housing acts as a heat sink; rated for continuous operation from -40°C to +85°C
Military-grade breather valve
IP68-rated breather equalises internal pressure to prevent condensation while keeping the seal intact
Sealing method
Integrated moulded lens and seal ring with plasma dispensing, preventing dust from building up at the edges
Waterproof certification
IP68 and IP69K (dust-tight, submersion and high-pressure, high-temperature water jets)
Lens
Clear, impact-resistant polycarbonate (PC)
Connector
2-pin DT connector; weatherproof, locking and vibration-secure
Recommended wiring kit
Not included. Use a relay-switched harness with an inline fuse and suitably rated cable: pair draw is about 8–9A at 12V (about 4–5A at 24V) at full load
The Titan ZR-9 is designed for people who rely on their lights, not just for the look.
Off-road and 4x4 expeditions: forest tracks, green lanes and remote routes where long reach and low glare matter
Agriculture: tractors, combines and harvest work on 12V and 24V machinery
Commercial and fleet vehicles: vans, HGVs and utility vehicles that run in poor light
Emergency and rescue support: rural, mountain and search operations that need reach and dependable sealing
Pickups, camper vans and overlanding builds: bumper, bull bar and roof mounting
Trades and site vehicles: reliable work lighting in mud, dust and wet conditions
SpectrumTek is a UK-based supplier of LED vehicle lighting and control systems for the UK and Europe. We publish actual measured output and clear specifications, so you can compare lights honestly. Every product page lists what is and isn't in the box, and our team can help with fitment and wiring advice before you buy.
All SpectrumTek Titan ZR-9 lights come with a 24-month warranty and UK-based support. [Add returns policy and UK dispatch details here.]
Reach without the glare: the anti-glare lamp cup throws light 660m ahead to 1 lux while reducing glare for you and other drivers
Honest, measured output: 13,120 actual lumens per pair on a stable 82W draw, so the figures you read are the ones to compare
Tough where it counts: a clear, impact-resistant polycarbonate lens and ADC12 die-cast aluminium housing stand up to trail debris and vibration
Sealed for real conditions: IP68/IP69K protection keeps out dust, mud, immersion and high-pressure washdown
Built for 12V and 24V: 9–32V DC input suits cars, 4x4s, trucks and agricultural vehicles
Choose your own wiring: supplied without a wiring kit, so you can fit the harness that suits your build