LED LIGHTBARS
LED Light Bars for Off-Road, Commercial and Professional Vehicles
SpectrumTek supplies a full range of LED lightbars from 7-inch to 52-inch, built around genuine OSRAM P8 and CREE LED chips with full CE, RoHS, IP68, and EMC certification. Every light bar in our range is available in multiple sizes, with straight and curved housing options across selected series to suit different vehicle roof lines and mounting positions.
Selecting the Right Light Bar
Size, chip specification, row configuration, and beam pattern are the four decisions that determine which light bar suits your application. A slim single-row 7-inch bar suits a bumper or A-pillar mount on a consumer 4x4, while a 52-inch dual-row curved bar is built for roof mounting on agricultural, commercial, or patrol vehicles covering long distances in low-visibility conditions.
Our range covers every point on this spectrum, from entry-level Cree-powered units to high-output OSRAM P8 laser beam series for professional and operational use.
Our LED Light Bar Series
Entry and Mid-Range Light Bars
Our entry and mid-range series deliver certified LED performance for consumer builds, agricultural machinery, and light commercial fitments at accessible price points.
Available configurations across entry and mid-range series:
-
7-inch to 52-inch sizes covering bumper, roof, and bull bar positions
-
Super-slim housing profiles for low-profile roof and bonnet mounts
-
Straight and curved options on selected series
-
Cree LED chips with 7D multi-faceted reflector technology on selected models
-
Single and dual-row configurations for output flexibility
These series are well-suited to off-road builds, overlanding, recovery vehicles, farm machinery, and utility vehicles where a reliable, weatherproof light bar is required without specialist procurement requirements.
Performance and High-Output Light Bars
Our performance series is engineered for customers who need maximum output, verified chip provenance, and full compliance documentation for professional or operational use.
Key performance series specifications:
-
OSRAM P8 LED chips across flagship series for verified lumen output
-
Laser beam optical technology on the RX-Ultra series for extreme long-range throw
-
White and amber DRL combinations on selected series for dual-function use
-
Amber and white strobe capability on the Evo X series for emergency and warning applications
-
Dual-row configurations from 22-inch to 52-inch for maximum output in larger housings
-
Straight and curved housing options across the Vortex-FX and Flux XR series
These units are suited to commercial fleets, emergency services, highways vehicles, defence applications, and professional off-road use where output reliability and compliance credentials are essential.
Light Bar Size and Mounting Guide
Choosing the correct size for your mounting position ensures the best optical output and a clean installation.
-
7-inch to 10-inch: Bumper mounts, A-pillar positions, ditch-light style fitments
-
12-inch to 22-inch: Bumper top mounts, bull bar positions, cab roof front edge
-
30-inch to 40-inch: Roof mounts on mid-size 4x4 and pickup truck platforms
-
50-inch to 52-inch: Full-width roof mounts on trucks, agricultural vehicles, and commercial platforms
Straight bars are the standard choice for most mounting positions. Curved bars follow the roof line profile of pickup trucks and larger 4x4 platforms for a cleaner fit and improved peripheral spread.
Certifications Across the Range
All SpectrumTek light bars carry independent waterproof certification to IP67 and IP68 as standard, with IP69K ratings on units specified for emergency services and industrial vehicle use. CE conformity, RoHS compliance, and EMC certification are carried across the full range.
EMC certification is particularly important for light bars fitted to vehicles with on-board GPS, radio communications, or electronic control systems, confirming that the light bar does not emit interference that could affect those systems.
Full certification documentation is available on request for fleet procurement, public sector supply, and government contract purposes.
Wiring Kits for Light Bar Installation
Every light bar installation requires a correctly rated light bar wiring kit to ensure safe, reliable operation. SpectrumTek supplies matched single and dual-output wiring kits with pre-wired relay, fuse protection, and correct cable gauge for LED load ratings. Wiring kits are available separately on our wiring kits page.
Contact info@spectrumtek.co.uk for advice on wiring kit selection for your specific light bar and vehicle combination.
FAQ
Q1: What is the difference between a single-row and dual-row LED light bar?
A single-row bar uses one line of LED chips across the housing length, producing a focused output profile suited to long-range driving use. A dual-row bar uses two stacked rows of chips, producing higher total output from the same housing length, making it better suited to wide-area illumination and demanding operational environments.
Q2: What does a curved LED light bar offer over a straight one?
A Curved LED Light Bar follows the roof line profile of pickup trucks and larger 4x4 platforms, providing a flush, low-profile fit and a wider peripheral spread compared to a straight bar mounted flat. The choice depends on your vehicle roof profile and mounting position.
Q3: What is laser beam technology on the RX-Ultra series?
Laser beam optics use a precision-engineered reflector and lens system to concentrate LED output into an exceptionally long, tight beam throw. This is suited to high-speed off-road driving, patrol, and recovery use where maximum forward visibility at distance is the primary requirement.
Q4: Are amber and white DRL light bars road-legal in the UK?
DRL and auxiliary lighting on UK roads must comply with current Road Vehicles Lighting Regulations. CE-certified light bars meet the manufacturing compliance standard, but fitment and use on public roads remains the responsibility of the vehicle owner. We recommend consulting a qualified installer for road-use applications.
Q5: What are the best LED light bars for trucks?
The best LED light bars for trucks depend on the vehicle and application. For most pickup trucks and commercial vehicles, 30-inch to 52-inch LED lightbars provide excellent coverage. A Curved LED Light Bar is often preferred for roof-mounted installations, offering a cleaner fit and wider light spread.












